I'm selling out of derbys! i have met alot of great people and have had some fun. I need a new truck for college. I have a 89' vic that's half built. It has a fresh loaded 76' Cordoba front bumper on the front. We cut 7.5" off. It has all the frame seams welded. It has been pitched a lot also. It has 2"x2"x1/4" square tubing gussests welded in. It has 1/4" hump plates. Extra body mounts welded welded in at the hole about 8" in front of the rear crush box. It has a 10" long piece of angle iron for the tranny crossmember welded in. It has some body mounts in it. It will come with 60' of 3/4" all thread. It will also come with some washers and nuts. I also have some 1" all thread for the core support. It has a loaded 76' Nova front bumper on the back. The back bumper is set 15.25" off the ground. The rear frame rails are creased. It has new 5.50-15 fork lift tires on the front and 15" skid steers on the back. The front tires are sitting on new woodward rims. It has a 9"/12 bolt hybrid rear end. It has stock gears with a full spool and stock gm 31 spline axles. It needs the A-arms welded solid and a cage and a power train.

I have a Chevy sbc 400. It has a eddlebrock performer intake and a eddlebrock carburetor. K&N ait filter. 4 into 1 Dec headers that have been ran twice. It has an Accel HEI distributor and plug wires. One plug wire doesnt match because it got burned. I do have a new Accel HEI distributor and new street fire plug wires. It needs a crank pulley, belts, and a fan. I have a new 18" flex-a-lite fan for it. You may wanna buy a cradle/pp and a dp. YOu may also want to get a fan clutch eliminator. I have a sbc 305 that I was gonna rebuild. I also have all the stuff for a sbc 350 except for the block! I have a th400 transmission out of a truck. I have a th350 transimission. Both are fesh never derbied but are stock. I have a th350 thats been derbied it may be good. I also have another set of 22" by 1/4" hump plates.

I have a new XXX brake pedal with an ext. pedal and new motor mounts for sbc in a ford. I have a new chambliss welding transmission protector. I have have new wheel centers for big bolt chevy and small bolt ford. I also have new sweets hump plates, 14" wheel plate and 15" wheel plate. I have another set of dec 4 into 1 headers for sbc. I have a new m&m boys battery box. I have a gas tank thats good to go. I have other battery boxes. I have a m.o.p steering knuckle for ford. I also have a home made steering column that you need to weld that knuckle on. I have a push pull shifter and all the stuff to make a tail shaft bolt on shifter. I have the plate that bolts to the transmission from m.o.p and some 3/8 all thread with helm joints. I have the two seats out of the vic and two mustang seats. I have misc. 700-15 tires on ford and chevy rims. Some hold air and some don't. You get em all regardless. I have the front frame rails for a bubble lincoln. they have the gussets and crush boxes on em. I also have a pre ran 74 newport. i think its junk but maybe you can fix it! I have a box vic hood thats trimmed for bubbles and a 76 olds hood that i was gonna build for the vic. I also have a aluminum bubble hood ill throw in. I also have some military ammo boxes and some pans with nuts and bolts in em. You also get a tranny cooler. id atleast put a fan on it and mount it to cage with longer lines. I also have two 15" rim gaurds and tubes. I believe that's everything. post or pm me your number and I'll text you with pictures of everything. I want to sell everything for $4500 cash. I will put the doors back on it and fill it up. We can use the tractor to load it up. If I have forgot something Ill post it. I may have but I do not believe I did.